IPhone 17 Air Goes Clear After Peeling Once more The Layers

{Photograph} credit score rating: Phone Restore Guru
Phone Restore Guru disassembled an iPhone 17 Air to remove the rear glass and reveal what’s inside – a harder course of than common because of cellphone’s curved digital digicam space, which required a fragile contact. He documented every step, turning a considerably straightforward disassembly proper right into a nail-biter that finally paid off with some pretty spectacular outcomes.

https://www.youtube.com/watch?v=Okay-sV2AGZ7cchttps://www.youtube.com/watch?v=Okay-sV2AGZ7cc
First points first: he unscrewed the once more after which heated the glass to remove the glue. A thermal pad was merely eradicated with isopropyl alcohol, and to his astonishment, the wi-fi charging coil received right here alongside for the journey. Down on the bottom, he discovered some thicker magnets than in prior iPhones, thicker rings that had beforehand escaped detection. He put these aside after peeling out the metal plates, the flash, and the rear mic, all whereas preserving the heat on the glass to make the work barely easier.

Getting the magnets out wished some expertise, so he slipped on a pair of gloves to guard his palms from the heat gun’s blast, which was softening the glue that held the array collectively. A MagSafe puck received right here in helpful for yanking the magnets away, and he slipped a sheet of paper between them and the puck to cease scratches. A handful of the magnets have been barely overlapping, nonetheless barely tweaking and repositioning launched them once more collectively into one sturdy piece. Subsequent, he wished to get rid of the adhesive residue and clips.

However, the digital digicam area was in all probability essentially the most troublesome drawback. Its inward curvature is awfully steep, with the similar silicone layer current in AirPods. He used heat to scrape away the silicone, exposing the metal backplate. He had meant to remove the plate using gallium, a liquid metal that merely dissolves aluminum when heated in water and distributed over the ground after eradicating any coatings and defending the digital digicam lenses. After half-hour, nonetheless, a quick examination with a razor blade revealed that the plate was constructed from stainless-steel considerably than aluminum. So, once more to Plan B.

This entailed utilizing bodily stress to remove the digital digicam space. He first used heat to weaken the welds, and smoke ascended as he lifted the precept plate and cleaned up the metal components surrounding the lens. One notably exhausting inside plate required some prolonged heat to remove. Lastly, he was able to take away the paint from the flat glass objects with a paint scraper on the current ground. The Apple model, meticulously carved into the glass, remained intact.

Curved glass necessitated a novel method. Fume extractors eradicated harmful vapors from the soldering station whereas he melted paint in tight spots. The iron assisted in areas the place blades couldn’t attain with out cracking. Returning to the heat pad, he combined blade work and heat on the plateau’s flatter areas sooner than ending with alcohol wipes for a transparent finish. The glass was completely clear and capable of be rejoined with the {{hardware}}.